Good idea. I did the same, but wherever there's a non-standard nut, I maked
it in red and put a red dot on the top outside corner of thge manual page -
and then when I repalce it with the 'final' part. I cross it off and
intitialize it.
Ferg
----- Original Message -----
From: "John & Amy Eckel" <eckel1@comcast.net>
Subject: Re: Europa-List: Neville: Can stuff nuts be reused?
|
| Brian,
| I bought nuts at the hardware store for the trial and error fitting
| and use the stiff nuts for what I hope is the final assembly. To
| prevent errors you can paint the cheapo nuts red.
|
| John, A230, NJ
|