Can you post some more details please.
Duncan McF
----- Original Message -----
From: "Cliff Shaw" <flyinggpa@comcast.net>
Subject: Re: Europa-List: Seats
>
> All
>
> The Oregonaero design is what I followed. I don't know if I did it
exactly,
> but after 2 hours of flying , I don't have any urge to get out of the
plane.
> The seats in "Wile E. Coyote" are the best I have ever set in !!!!
>
> Cliff Shaw
> 1041 Euclid ave.
> Edmonds, WA 98020
> 425 776 5555
>
> ----- Original Message -----
> From: "Ami McFadyean" <ami@mcfadyean.freeserve.co.uk>
> To: <europa-list@matronics.com>
> Subject: Re: Europa-List: Seats
>
>
> <ami@mcfadyean.freeserve.co.uk>
> >
> > Another subtlety in seat design can be found at
> >
> > http://www.oregonaero.com/p19_2001.htm#drawings
> >
> > where a wedge of foam along the BACK edge of the seat squab makes a
> > mountain of difference to long term comfort.
> >
> > Duncan McF.
> > ----- Original Message -----
> > From: "Gerry Holland" <gnholland@onetel.com>
> > To: <europa-list@matronics.com>
> > Subject: Re: Europa-List: Seats
> >
> >
<gnholland@onetel.com>
> > >
> > > Duncan Hi!
> > > >
> > > >
> >
>
http://members.eaa.org/home/homebuilders/building/interior/Carving%20Foam%20
> > > > Seats.html
> > >
> > > Many Thanks for pointing in this direction. It was today's subject or
> task
> > > to consider and has expounded some good advice.
> > >
> > > Regards
> > >
> > > Gerry
> > >
> > > Europa 384 G-FIZY
> > > Trigear with Rotax 912 and Arplast CS Prop.
> > > Engine and Prop getting near to starting. Final pipework.
> > > Painting completed. Just vinyl design scheme to be added.
> > > Completing Wiring to Panel.
> > > Includes Dynon EFIS, KMD 150, Icom A-200 and SL70 Transponder. AoA
> Fitted.
> > > Shoulder Width Mod completed. Heater Unit idea is firming up.
> > >
> > > http://www.g-fizy.com
> > > +44 7808 402404
> > > gnholland@onetel.com
> > >
> > >
> >
> >
>
>
|