Tony,
If I was to do it again I would not use screws, rivets or anything
mechanical to pull it together. I would have supported the bottom and
lowered in the module and pressed it home with weighted shot bags. I had a
big bunch of these that Jenny had stitched up. If you want to make some up
quickly you can buy # 4s hot gun pellets and put them in zip loc bags.
I would at least experiment with this idea and if you can't get good gap
closure then I would go with plan A. For applying the Redux get your self
some empty silicone gun tubes. I had tried icing bags, toweling it in and
various other methods and I would have to say it works 10 times better than
anything else.
Good luck, Paul
|