Paul:
I have 3 busses I have built into the plane. Each bus consists of the B&C
fuseblock assy. The Main Bus, Essential bus. and battery bus. The
essiential bus is built on the vertical section of the shelf in front of
the passenger facing the passenger. I have built a bulged cover that goes
over this and is held in place with
Velcro. I cut a rectangular hole in the surface that is 90 degrees to this
surface in the side of the instrument panel. The main bus is recessed in
here on standoffs from the surface. A flat cover secured with Velcro goes
over this. The battery bus is under the baggage bay area on one of the
plywood uprights. I expect the battery to go under the right compartment.
Steve Hagar
A143 Mesa, AZ
> [Original Message]
> From: <PPalmer007@aol.com>
> To: <europa-list@matronics.com>
> Date: 7/26/04 4:46:53 AM
> Subject: Europa-List: Europa electrics ( busbars)
>
>
> I am trying to determine the best place to position the busbars in my
friend
> danny's europa three are required. One earth busbar, one avionics busbar,
> and the main busbar. I dont want to re-invent the wheel so can anyone out
there
> help me???
> Many thanks Paul
>
>
|