If you are familiar with Van's plastic vents, these are the same dimensions.
1-5/8" outlet, with a 2.25" eyeball and a mounting flange of 3 inches
square. The mounting holes are 2.75 inches spacing.
Fabian
----- Original Message -----
From: "Dan Bish" <N914RB@earthlink.net>
Subject: Re: Europa-List: RE: Eyeball vents
>
> What diameter is the hole?
>
> ----- Original Message -----
> From: <fablef@bellsouth.net>
> To: <europa-list@matronics.com>
> Subject: Re: Europa-List: RE: Eyeball vents
>
>
> >
> > Same thing in the ACS for $160.00 each? Mine are $199.00 for the pair.
> >
> > Fabian
> >
> > ----- Original Message -----
> > From: "Troy Maynor" <wingnut54@charter.net>
> > To: <europa-list@matronics.com>
> > Subject: Europa-List: RE: Eyeball vents
> >
> >
<wingnut54@charter.net>
> > >
> > >
> > > >
> > > Paul
> > >
> > > I rarely get vocal about these sorts of issues, but in this case I
> will
> > > contribute
> > > my thoughts. I completely agree with you and disagree with Ken.
These
> > > lists are no place for a commercial. I agree with Ken that getting
> > > information
> > > about a possible parts source is beneficial, but I regard ANY
commercial
> > > entry
> > > to the list as SPAM. Perhaps there could be a location on the list
> > similar
> > > to the photo share area, where folks can place such information.
> > >
> > > Jeff>>>>>>>>
> > >
> > >
> > > Not to mention you can buy the same thing in ACS for $160.00 each.
> > >
> > > Troy Maynor
> > > N120EU Monowheel Classic
> > > Left to finish:
> > > Paint,interior,engine install, wiring.
> > >
> > >
> >
> >
>
>
|