In adddition to John Heykoop's forwarding of a previous answer from me [
please do that, it saves me from doing it ! ] The minimum glue line width [ the
last facet of the aileron / flap closeout] which will be bonded to the upper
panel, should be 3/8'' [ 10mm in foriegn]
Don't forget to tape a piece of floor ''lino'' onto the upper leading edge of
both the aileron and flap, when closeing out the upper panel, when removed
after full cure of the Redux, you will have a uniform gap twixt the two.
Cheers,
Nev.
|