Gidday,
No notice from the administrators downunder, here inAussie. Any update on
the e-mail address to use to get to the administrator? I have only used the
one which addresses an individual, and that is a little easy to claim you
didn't receive a message. I have sent my first message to:
stephanie.coulter@redman-nichols.co.uk
Reg
Tony Renshaw
At 05:18 PM 8/4/2004, you wrote:
>
>I'd expect it to take 5 days or so to cross the pond, Dan - anyone else over
>there or in Oz, France, Finland, etc. got one yet?
>
>Regards,
>Jeremy
>
>Jeremy Davey
>Europa Monowheel 537M G-EZZA
>Tail done
>Standard XS wings with mods underway
>CM installed in fuse (with airbrakes fittings)
>1200 build hours to date
>Intended fit:
>Rotax 914 turbo, Airmaster CS fully-feathering prop
>Lots of lights, buttons, switches, gizmos, and alarms
>
>
>-----Original Message-----
>From: owner-europa-list-server@matronics.com
>[mailto:owner-europa-list-server@matronics.com] On Behalf Of Dan Bish
>To: europa-list@matronics.com
>Subject: Re: Europa-List: Administrator's questionnaire
>
>
>No questionaire on this side of the pond.
>
>Dan
>A144
>Tucson, AZ
>----- Original Message -----
>From: "Jeremy Davey" <EuropaFlyer_3@msn.com>
>To: <europa-list@matronics.com>
>Subject: RE: Europa-List: Administrator's questionnaire
>
>
> >
> > The last two paragraphs on page 2 are interesting, though...
> >
> > Regards,
> > Jeremy
> >
> > Jeremy Davey
> > Europa Monowheel 537M G-EZZA
> > Tail done
> > Standard XS wings with mods underway
> > CM installed in fuse (with airbrakes fittings)
> > 1200 build hours to date
> > Intended fit:
> > Rotax 914 turbo, Airmaster CS fully-feathering prop
> > Lots of lights, buttons, switches, gizmos, and alarms
> >
> >
> > -----Original Message-----
> > From: owner-europa-list-server@matronics.com
> > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Alan Gilbert
> > To: europa-list@matronics.com
> > Subject: Re: Europa-List: Administrator's questionnaire
> >
> > <alangilbert@classicfm.net>
> >
> > I received mine - I wouldn't hold out too much hope for returned funds as
>a
> > creditor - Have you seen how much the Administrators are charging the
> > company?? Jeezus - almost as much as Wilson's salary! ! !
> > ----- Original Message -----
> > From: "Jeremy Davey" <EuropaFlyer_3@msn.com>
> > To: "Europa Forum" <europa-list@matronics.com>
> > Subject: Europa-List: Administrator's questionnaire
> >
> >
><EuropaFlyer_3@msn.com>
> > >
> > > Just a heads-up for those wondering about how to best contact the
> > > administrators. I got (unsolicited by me) a questionnaire from Redman
> > > Nichols this morning. I assume they are going out to all creditors and
> > > suppliers - but I'm sure the validity of that assumption will become
>clear
> > > in the next few days.
> > >
> > >
> > > If you're a creditor I presume it would be best to hang on a few days
>and
> > > wait for your copy. Also, perhaps the overseas folks could advise if
>they
> > > get a questionnaire too, so we know how wide Redman Nichols are
>spreading
> > > their net?
> > >
> > >
> > > Regards,
> > >
> > > Jeremy
> > >
> > > Jeremy Davey
> > >
> > > Europa Monowheel 537M G-EZZA
> > >
> > > Tail done
> > > Standard XS wings with mods underway
> > > CM installed in fuse (with airbrakes fittings)
> > >
> > > 1200 build hours to date
> > >
> > > Intended fit:
> > > Rotax 914 turbo, Airmaster CS fully-feathering prop
> > > Lots of lights, buttons, switches, gizmos, and alarms
> > >
> > >
> >
> >
>
>
|