> The manual calls for the FL3 (outboard) hinge to line up mid way
> between the two W18 plates. Mine does not line up centered between
> the W18 plates. It is about 4mm right of center. Is it necessary
that the
> outboard hinge is exactly centered or just somewhere between the two
> W18 plates?
>
> Dave Simenauer
It appears for the trigear they simply reworked what was there on the
monowheel. I don't think all that beef is needed out there at all, so
centering does nothing structurally. I'd grind down one spacer and
add washers to the other to make up for 1/4" in off-centering.
Reg,
Fred F.
|