Hi Paul
I don't have any of the stinky rubber hose but I think I have that much
of some clear polyurethane that is much better. If you don't find what
you need, get back to me and I will check. (I have used it for the
whole angle connection instead of aluminum. You can see the level in
the tubing while filling.)
Tom
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul
McAllister
Subject: Europa-List: Source for 2" rubber hose
<paul.mcallister@qia.net>
Hi All,
I have an aluminum elbow fitted between my filler neck and the fuel tank
and is it is connected with a couple of short sections of rubber hose
that I cut from the original rubber elbow supplied by Europa.
The pieces I salvaged were a bit short and I am going to have to replace
them. Can any one tell me where I can get fuel resistant rubber hose 2'
in diameter. I need two pieces about 3.5: inches long.
Thanks, Paul
==
==
==
==
|