Kingsley Hurst wrote:
>
>Rocketman wrote:
>
>
>>The ignition (or "on") lug on the starter switch will be hooked to the
>>
>>
>trim power, so that when the switch is on, the trim power will be on and
>hooked directly to the battery, via the starter switch. This will
>isolate the trim from all other circuits and will allow me to turn it
>off, with the switch.
>
>Jeff,
>
>Not familiar with the marine switch you mentioned but does your set-up
>mean that in the event of a run away trim condition, if you use this
>switch to stop it, the engine will be turned off too?
>Just wondering.
>
>Regards
>Kingsley Hurst
>Mono Classic 281 in Oz.
>
>
>
Kingsley,
All the switch will do is engage the starter and provide power for the
trim. In the case of runaway trim, I can simply turn the switch off and
the power to the trim will cease. The mags will be on a separate
circuit and would be unaffected by the switch...
--
Jeff - A055
Builders Log: http://www.N55XS.com
|