Ivor, John,
thanks for the info. Got now more then I could have asked for.
Thanks
Michael Grass
Trigear A266
Detroit, Mi
Just about to be ready to bond in the cockpit module.
Wings not yet started
----- Original Message -----
From: "John & Amy Eckel" <eckel1@comcast.net>
Subject: Re: Europa-List: Finger brake lever length
>
> Michael,
> I'm not sure where I got the dimensions, but here goes.
> The spacing from the bottom hole to the actuator is 1.25 inches.
> This dimension is easy to check.
> From the bottom hole to the top hole is 7.25 inches.
> I used 1/8 X 1 Al.
>
> They look like the ones in the Mod.
>
> John, A230
> ----- Original Message -----
> From: "Michael Grass" <M.Grass@comcast.net>
> To: <europa-list@matronics.com>
> Subject: Europa-List: Finger brake lever length
>
>
> >
> > Group,
> >
> > I would like to find out what length Europa has chosen for the finger
> brake levers from mod 65. If somebody would be so kind to give me the
> dimensions from the right lever from center bottom hole to the center of
the
> hole at the actuator and from the bottom hole to the hole for the handle
> that would be great. I hope to fabricate the levers only once ;<)
> >
> > Thanks
> >
> > Michael Grass
> > Trigear A266
> > Just about to be ready to bond in the cockpit module.
> > Wings not yet started
> >
> >
>
>
|