R.C.Harrison wrote:
>
>Hi! Kevin
>Yes, but remember seven things:-
>1) drill at a suitable angle to help you run the wires.
>2) drill at a point with little movement (near the pivot)
>3) drill at a point still in the greater cross-sectional thickness.
>4) drill below the inserted top tube of the stick
>5) keep the hole as small as possible.
>6) use heat shrink to sheath the wires from chafing.
>7) ensure you route the wires suitably first time.
>
>Stick top controls of flaps (for trike) and trim leave one hand free for
>other duties. But you really need to make a flip over cover to stop the
>weight of charts changing your settings in flight or awaiting departure
>!
>
>
>
>
Kevin,
Bob is right on. My RC Allen is wired for trim and radio flip flop and
channel search. No problems with it, at all...
--
Jeff A055
Builders Log: http://www.N55XS.com
--
Checked by AVG Anti-Virus.
|