Hi! Brian.
Before you "wax lyrical" Please compare props with "WOODCOMP" from Czech
Republic. I've been and seen it is good gear and excellent quality go to
http://www.woodcomp.cz
Their man Jiri Holoubek speaks good English.
Regards
Bob Harrison G-PTAG Europa 337 MKI/Jabiru 3300 MT CS Prop.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
EuropaXSA276@aol.com
Subject: Re: Europa-List: Arplast info please? Was prop balancing (+
Advert)
In a message dated 3/15/2005 1:02:25 AM Central Standard Time,
combined.merchants@virgin.net writes:
I then changed my prop for an Arplast PV50 VP prop and the
vibration was much worse, so I had a go at dynamically balancing it by
trial
and error by placing washers under the spinner screws and judging
whether
Hi William:
Where can I find information on this Arplast PV50 VP? I just Googled it
and
all that really turns up are Europa related sites. It appears that a
number of
Europas may have this baby installed. Is this a 3 blade design?
Electric?
Seeking Europa XS performance information when bolted to a 912ULS.
Happy trails.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
|