Thanks Rowland,
I'll check the measurements.
It appears that others have only received one set of pulleys. One wonders
why I was lucky enough to get 2 sets of different sizes! < I hope my luck holds
out when I order my engine!>
I'm just curious as to which was the proper size to install. For now I used
the larger size. Less clearance to the floor for the safety retainer.
But It looks like I'll need to move the sight tube exit on the console
forward a few inches for good cable clearance.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
|