It appears that the concessus is a 4" viewing hole with 4 ply reinforcement.
Thank to all for the speedy replies! Back to the shop for me!
Appreciatively.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
From: EuropaXSA276@aol.com
Date: Sun, 8 May 2005 14:28:39 EDT
Subject: Re: Europa-List: All these access hatches and one "viewing" hole
-------------------------------1115576919
In a message dated 5/8/2005 6:48:11 AM Central Standard Time,
djgeldermann@cox.net writes:
I cut it out to a 4 inch access hole. I also added
another 4 inch access hole on the lower left side of the fuselage about 8
inches in front of the rear bulkheadand and about 6 inches under the leading
It appears that the concessus is a 4" viewing hole with 4 ply reinforcement.
Thank to all for the speedy replies! Back to the shop for me!
Appreciatively.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
-------------------------------1115576919
<META content"MSHTML 6.00.2900.2627" nameGENERATOR>
In a message dated 5/8/2005 6:48:11 AM Central Standard Time,
djgeldermann@cox.net
writes:
I cut it out to a 4 inch access hole. I=20also added
another 4 inch access hole on the lower left side of the fuselage about 8
inches in front of the rear bulkheadand and about 6 inches=20under the leading
It appears that the concessus is a 4" viewing hole with 4 ply reinforcement.
Thank to all for the speedy replies! Back to the shop for me!
Appreciatively.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
-------------------------------1115576919--
|