Hi Michael
I've had a quick look at the pcb file and downloaded the design software.
The board looks pretty amateurish (and doesn't include the relays to switch
the trim motor) - I may re-lay the board myslef (using the software I use at
work) to give a much better quality of board - the current one doesn't have
a solder mask or ident - very necessary for those with little soldering
experience.
I'll get a price for the 'as is' board and tell people this and the revised
version (including the relays).
We seem to be there with the quantity so, I'll give my manufacturer a call.
Would you be after a bare board, kit or assembled unit?
Regards
Peter
----- Original Message -----
From: "Michael Grass" <M.Grass@comcast.net>
Subject: Re: Europa-List: EZ-TRIM Altitude Hold PCB
>
> Peter,
>
> I am defiantly interested in the PCB. Count me in as being interested.
>
> Michael Grass
> A266 Trigear
> ----- Original Message -----
> From: "Peter Rees" <peter.rees05@ntlworld.com>
> To: <europa-list@matronics.com>
> Subject: Europa-List: EZ-TRIM Altitude Hold PCB
>
>
>> <peter.rees05@ntlworld.com>
>>
>> If enough people are interested in the EZ-Trim (and if I'm not treading
>> on
>> anyones toes), I would be happy to approach some of the board suppliers I
>> use at work to get some boards made (the ones you can make at home really
>> aren't of a standard you should use on an aircraft.
>>
>> I might at a push even assemble a couple of units for those who are
>> 'electronically challenged'
>>
>> If anyone is interested, drop me an E-mail - I guess we would need to
>> order
>> a minimum of 6 boards but the more we can order, the cheaper they'll be.
>>
>> Peter
>>
>>
>>
>
>
>
|