Good day All,
I've just temporarily attached the rudder and installed the pushrod to the
Singleton Tailwheel Mod. At maximum deflection, I can only get the rudder to
achieve about 28 degrees to either side of center. I've looked through the
Forum archive but have drawn a blank about further adjustments to get the
called
for 30 degrees +2/-0. Should I adjust the rudder cables from the foot pedals
to increase travel? Before doing this I wanted to ask those that have already
accomplished this.
Mike Duane A207
Redding, California
XS Conventional Gear
Installing the rudder, re enforcing the door sills,
still mulling over the trim motor installation,
and working on hanging the instrument module.
|