I've just temporarily attached the rudder and installed the pushrod to the
Singleton Tailwheel Mod. At maximum deflection, I can only get the rudder to
achieve about 28 degrees to either side of center. I've looked through the
Forum archive but have drawn a blank about further adjustments to get the
called
for 30 degrees +2/-0. Should I adjust the rudder cables from the foot pedals
to increase travel? Before doing this I wanted to ask those that have already
accomplished this.
Mike Duane A207
Mike
have you adjusted the tips of the tail wheel horn to allow more deflection? You
need to file a little off to let the tailwheel turn some more
Graham
|