Steve
Might that instruction regarding 4 ply be intended for the classic build? I
don't
remember dong a glass lay-up on the inside and defiantly did not do one on
the outside.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: SteveD
Sent: Saturday, September 24, 2005 3:23 PM
Subject: Europa-List: RE: Let talk about Fuselage Gaps! <Flame Extinguisher>
Rocket Man wrote: "The most important thing is to make sure
that your tail fin is square and pulled down tight in the rear. Any
small gaps will be covered with the 4 ply of Bid that you will be
reinforcing the seam with. Once sanded and filled and sanded and filled
and sanded and filled and sanded, you'll never know it was there. The
joint will be plenty strong... "
4 ply of bid on what seam? The whole top to bottom seam? I can't find this
taping
in the manual... Can someone give me a page number... I've searched the PDF
manual and still can't find it..
Thanks,
SteveD
----------------
Visit EuropaOwnersForum http://www.europaowners.org/
|