Paul,
When I bonded my glass, I carefully trimmed the rubber coating back an
inch or so, leaving the rest intact. Once bonded, I used the blue
masking tape used by painters, to protect any exposed areas. It is low
tack and works fine. If you have already removed the protective
coating, transfer tape, as used by graphics shops, works well, too...
Jeff - N55XS
76+ hours
Paul Stewart wrote:
>
>Not far off bonding in the glass. Anyone got any suggestions for
>protecting it afterwards while still working in and around the fuselage
>? Wondered if you can get any sort of low tack film such as the stuff
>you often get covering LCD displays.
>
>REgards
>
>Paul
>
>G-GIDY
>
>
>
>
|