Karl,
Pictures would be great to look at...
Steve Crimm
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of KARL HEINDL
Subject: RE: Europa-List: mounting base for finger brake cylinder
Will,
No, I beg to dffer from Cliff. I do all interior tunnel maintenance from the
top ( why does everybody like to crawl underneath the fuselage ?). The brake
cylinder assembly is mounted on a removable plate, and I have a removable
lid over the rest of the tunnel, so I can use it also for storage, and in my
case aerial photography through a window in the bottom of the fuselage.
Karl
>From: "William Daniell" <wdaniell@etb.net.co>
>Reply-To: europa-list@matronics.com
>To: <europa-list@matronics.com>
>Subject: RE: Europa-List: mounting base for finger brake cylinder
>Date: Tue, 25 Oct 2005 14:48:35 -0500
>
>--> <wdaniell@etb.net.co>
>
>Ah so the secret is longer levers?
>
>I am thinking is that you mount everything within the tunnel with two
>slits for the levers and no other openings on the top of the tunnel -
>all maintenance done from the belly.
>
>Is this right?
>
>Will
>
>-----Original Message-----
>From: owner-europa-list-server@matronics.com
>[mailto:owner-europa-list-server@matronics.com] On Behalf Of KARL
>HEINDL
>To: europa-list@matronics.com
>Subject: RE: Europa-List: mounting base for finger brake cylinder
>
>
>Will,
>
>Yes, I did originally, but with limited success, mainly because I used
>the original levers with short extensions. Whatever cylinders you use,
>you need long and strong handles. The original gokart cylinders were
>certainly less troublesome otherwise. Myself and other builders had to
>fiddle around quite a bit with the Jamar dual cylinder before it worked
properly.
>
>Karl
>
>
> >From: "William Daniell" <wdaniell@etb.net.co>
> >Reply-To: europa-list@matronics.com
> >To: <europa-list@matronics.com>
> >Subject: RE: Europa-List: mounting base for finger brake cylinder
> >Date: Tue, 25 Oct 2005 13:31:57 -0500
> >
><wdaniell@etb.net.co>
> >
> >Has anyone mounted the foot brake cylinders as finger brakes?
> >
> >Will
> >
> >-----Original Message-----
> >From: owner-europa-list-server@matronics.com
> >[mailto:owner-europa-list-server@matronics.com] On Behalf Of G-IANI
> >To: europa-list@matronics.com
> >Subject: RE: Europa-List: mounting base for finger brake cylinder
> >
> >
> >Bruce
> >
> >You are right the Europa brake cylinder is the Jamar US2002X
> >
> >I will send you direct a photo of my installation bracket. Have a
> >look
>and
> >I can send you more details if needed.
> >
> >On the levers I would buy the Europa parts. They carry quite a load
> >so strength and hardness are important as well as size.
> >
> >
> >Ian Rickard #505 G-IANI XS Trigear
> >Europa Club Mods Rep (Trigear)
> >e-mail mods@europaclub.org.uk
> > or direct g-iani@ntlworld.com
> >
> >
>
>
|