Steve,
How would one go about determining the technical requirements for the
Europa springs?
Jeff - N55XS
99.9 hours
Steve Hagar wrote:
>
>In my job as a manufacturing engineer in a plant I have occasion to use
>different
springs. The characteristics of the spring are wholly determined the material,
diameter of the wire and diameter of the coil. There arre several if not
many houses out there who do nothing but wind springs. Many are standard and do
not have to be specially made. In following this thread about the springs I
seem to get the impression that every one thinks there is a special recipe to
get these springs from a special unique supplier. What you want is an extension
spring with a certain diameter wire, certain diameter coil and of a certain
length. You can call Lee Spring, or Capitol spring or many others to see if is
one of their stock units or what it would take for them to wind it special which
they do all the time. You can find them on the internet.
>
>Steve Hagar
>A143
>Mesa, AZ
>
>
>Steve Hagar
>hagargs@earthlink.net
>
>
>
>
--
|