Ok, thanks Jimmy!
I hope all is going well with you. I tried to get to the AOPA convention at
Peter O'Knight, but found out it closed Saturday and wasn't open today.
Garry
----- Original Message -----
From: "Jim Thursby" <jthursby@tampabay.rr.com>
Subject: RE: Europa-List: Rubber engine mounts
> <jthursby@tampabay.rr.com>
>
> Hi Garry, I believe they are mounts for a Continental O-200 engine. Give
> Bob B. a call he will know for sure.
>
> Jim T
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Garry
> To: europa-list@matronics.com
> Subject: Europa-List: Rubber engine mounts
>
>
> While doing an annual inspection I discovered that the rubber engine
> mounts
> had lost their elasticity, causing my engine to "sag". After 5 years and
> 400 hours I suppose this shouldn't have come as a surprise. It's time to
> replace them. I recall reading on the forum a couple of years back, that
> there was a Cessna engine rubber mount which Europa builders were using
> very
> satisfactorily. If this is true, I can obtain the Cessna part much
> quicker
> (and probably cheaper) than I can from the UK. Does anyone remember this
> thread and if so can you point me to the Cessna part number?
>
> Garry Stout
> N4220S
>
>
>
|