Andy replied as follows:
Dear Jim,
We neglected to pre-cut the ends of your ailerons and airbrakes, sorry. You
need
to cut 1/2" from all the ends except the aileron root which should be cut at
1". This makes life easier for making the close-outs, but it would not be
impossible
to chevel out the foam after the cores had been laid up. What you want
to end up with is a reasonably flat and smooth end on which to lay up the
close-out. ( You'll know this from the other close-outs youll have done).
Regards
Andy
Jim Butcher A185
N241BW short wings flying
|