Europa-List: NSI CAP 140 prop issue

[GLENN CROWDER <gcrowder2@hotmail.com>]

I ran into the same situation with my earlier NSI CAP 140 prop with the 
wires going
into the hub.  No inflight problem but found one of the wires had almost 
worn thru.
There were/are some fairly sharp edges where the wires feed in and no heat
shrink protection.  I radiused the sharp corners and added a ton of heat 
shrink on the
wires to prevent chafing, then potted the wires with Goop so they coudn't 
flex.

                                          Glenn