Fergus Kyle wrote:
> How in Heaven can one install the bottom ones from
> behind the firewall, attempt to compress the 'Lord
> mounts' and turn on the requisite nuts in front -
> while holding the whole shebang together without
> dropping odd bits onto the floor in the process?
Ferg, just why y'all tryin' to use the proper length AN bolts as a
freakin' installation tool? ;-) Just go to the hardware store and buy
a long length of 5/16" threaded rod, and 5/16 nuts. Cut said rod into
pieces longer than the AN bolts. Affix engine and snug the nuts,
compressing the rubber bushings. Thence, one-by-one, remove your
threaded rod thingies and sub an AN bolt.
Might this work for you too?
In any event, Happy New Year!
Reg,
Fred F.
|