Hi Troy,
Best bet is to wait 'n see if you actually need one....if you do, then tape
a piece of alloy on, somewhere near the bottom, with Gaffer / Race / Duct
tape, [ call it what you will.....]tweaking between test flights, until you have
the required effect.
Then remove it, paint to match, and stick it onto the painted surface with 5
minute epoxy....which is plenty strong enough for the job, but when some
Muppet walks into it / tugs it to see how firmly attached it is / pushes the
plane around the hanger with it...... it will come off without hurting the
rudder !
Cheers,
Nev.
|