Hi Steve
Give me a chance to look. I changed my tailwheel to a sealed bearing one
and may have the original bolt and spacers. You can have them if I do.
Tom Friedland
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Steve Crimm
Sent: Tuesday, January 17, 2006 4:50 PM
Subject: Europa-List: Tailwheel Spacer
--> <steve.crimm@stephenscott.com>
It appears that the spacers on my aircrafts tailwheel were not installed. On
page 32M-11 it shows the3/8 th inch bolt that passes through the tail wheel
as 4.5 inches in length. Mine is 4 inches and without spacers. I want to
fix this so that it is correct and will be better secured on my trailer as
well as when I use my tailwheel dolly/towbar.
My question is what are the dimensions for the spacers and washers that go
on either side of the tailwheel? Also is there a torque value for this when
I put it back together?
Thanks,
Steve Crimm
N42AH
A058
--
--
|