Ferg
The Andair check valves are 44.5mm between the ends of the pipe (when pushed
fully home)
I will send you direct a picture of the layout I used for Terry Clark G-IRON
if this helps
Ian Rickard #505 G-IANI XS Trigear
Europa Club Mods Rep (Trigear)
e-mail mods@europaclub.org.uk
or direct g-iani@ntlworld.com
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Fergus Kyle
Sent: 19 February 2006 15:33
Subject: Europa-List: Check valve dimensions
Cheers,
I am planning the "fuel pump board" for the rear baggage area
and it will be about 13-1/2"x9-1/2" and vertical. When I received my FWF
kit, it appeasr the company was in its agony throes and I didn't notice some
lacking parts, among which were the NRV (check valves) which are spec'd in
parallel with now-series pumps. Roger is very kindly sending these, but in
the interim, I want to plan the layout.
If your magic carpet is nearby, and you think of it, I would
very much appreciate a measurement of the overall length of your
Europa-issue check valves and/or the approximate length of the 'body' OAL
minus nipples. I presume the nipples to be 3/4" or 19mm each for 8mm
tubing.
Thank you in advance,
Ferg
A064
engine hung
|