Hi! Steve
I had one but have graduated to using a syringe, without the needle
fitted, to fill the master cylinders. I fill them brim full with lots of
rag stuffed round the cylinder then put the plug cap into place by
fingers allowing excess oil to overflow into the rags. Then a final
squeeze up leaves the brakes" right on the button."
Regards
Bob Harrison G-PTAG Europa MKI/Jabiru 3300
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Steve Crimm
Sent: 12 March 2006 03:14
Subject: Europa-List: Mono Wheel Brake System
<steve.crimm@stephenscott.com>
I have been told that there is a funnel that screws into the top of the
master cylinder for a mono wheel when bleeding the brakes. Where does
one
get one of these funnels?
Thanks
Steve
N42AH
|