kheindl@msn.com wrote:
>
>
>Is anyone out there using longer propeller blades than the standard 62" WD
>on a trigear ?
>What is a safe limit, assuming the safety wire on the nose wheel suspension
>is adjusted if necessary, and assuming that the possibly soft bungee is
>replaced with the steel springs ?
>
>Cheers, Karl
>
>
>
>
>
>
>
>
>
Hi
My Tri has a 32.5" length from tip to hub centre. My blades are PV50
Arplast and I've had no problem at all since I replaced the standard
bungee with the multiple loop set up. The advantage I see with this
set-up is that if you find it too soft then just add another loop - a 15
minute job. I fly from very short bumpy field.
Rick Morris
912S CS PV50 Tri
|