Mike
The cowling is positioned reference the propeller. I made mine fit the 914S
flange
and then found out the Airmaster required a little different fit.
I suggest you rethink the fit. It sounds to me you have missed something.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: Mike Gamble
To: Europa-List@Matronics.Com
Sent: Sunday, April 02, 2006 12:31 PM
Subject: Europa-List: XS cowling ftting
With engine orientated correctly (1.5* to stb) the top cowling overlaps the
firewall
as expected but to the extent that the rearmost slot of the outlet vents
also half overlap the joggle.
I shall have to grind off the moulding and blank this vent off to fit the
cowling.
Can I consider this par for the course or have I fallen into some trap that
those
who have gone before can reveal?
Thanks chaps.
Mike Gamble
XS mono 440
|