Hi! Dean,Cliff,all
My experience with the MT brushes is excellent, They are most particular
that the brushes are set with explicit gaps to the slip rings AND MUST
BE SLIGHTLY (2 deg)
INTO DRAG MODE NOT PUSH MODE. Until I wrecked my prop. last week I'm
only on my second set (600 hours) and both sets are only 50% worn.
Regards
Bob Harrison. G-PTAG
Robt.C.Harrison
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Cliff Shaw
Sent: 10 June 2006 05:04
Subject: Re: Europa-List: Airmaster brushes
Dean
I thought my first set wore down quite fast. I had lots of black dust
around the front of the engine. I installed a replacement from
Airmaster last year. Now there is no dust and the brushes are as good as
new. I think there is a change in the brushes. I would suggest you sent
them an Email and get your new brush set from them. That is what I did.
Cliff Shaw
1041 Euclid ave.
Edmonds, WA 98020
425 776 5555
http://www.europaowners.org/WileE
----- Original Message -----
From: Dean Seitz <mailto:daseitz@cfl.rr.com>
Sent: Friday, June 09, 2006 1:50 PM
Subject: Europa-List: Airmaster brushes
Has anyone gotten brushes for the Airmaster cs prop from anywhere other
than
New Zealand? Just wondering if there was anywhere closer to the states
than
Airmaster. Shipping from there will probably be more than the parts.
Dean ========================= Features Subscriptions
Photoshare, and much much ;
==============================================
bsp; Email List ;
==================================================nbsp; generous
bsp;
========================================
|