| Subject: | Europa-List: RE: Propeller lug extraction |
|---|---|
| From: | steve v. <s.vestuti@virgin.net> |
| Date: | Wed, 23 Aug 2006 00:59:44 |
Hi Karl, can you feed a bolt in from the front thru the lug , then , fit a spacer at the rear of the prop flange, then, tighten a nut against the spacer this would push out the lug as you tighen the nut on the bolt you fed thru. i did this in reverse to initialy install the lugs. steve vestuti #573, still staring at my paint job! ---------------- Visit EuropaOwnersForum http://www.europaowners.org/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Europa-List: Propeller lug extraction, Karl Heindl |
|---|---|
| Next by Date: | Europa-List: Stainless plate, steve v . |
| Previous by Thread: | Europa-List: Propeller lug extraction, Karl Heindl |
| Next by Thread: | Europa-List: Stainless plate, steve v . |
| Indexes: | [Date] [Thread] [Top] [All Lists] |