Danny,
Long time ago since doing it however I think I used elbows (90 degree
connectors).
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
Ph +64 3 3515166
Mobile 021 0640221
ward.t@xtra.co.nz
----- Original Message -----
From: <danny@mcwalterscafe.co.uk>
Sent: Wednesday, September 13, 2006 1:01 AM
Subject: Europa-List: vacuum problems
> <danny@mcwalterscafe.co.uk>
>
> Hi All,
> Just started plumbing the vacuum system. I find I'm having
> problems fitting the connectors to the back of the AH and the DI. I'm
> using falcon gauges, GH02V-3 and DG02V-3. also the vacuum pump kit
> supplied by Europa. fitting the connector on the inlet on the AH would
> touch the firewall and therefore the pipe would bend and restrict the
> vacuum. The connectors for the DI have"T" pieces on then to connect to the
> gauge, I can screw one in but the "T" piece stops me screwing in the
> other. Hope this makes sense. Those who have done this job will probably
> understand what I'm going on about.
> Any ideas and help would be most welcome.
>
> Danny G-c.e.r.i
>
>
>
|