Simon,
The factory are now supplying two Matco master cylinders which are
compatable with the wheel cylinders and use aircraft spec. hydraulic fluid.
Hopefully, this will solve the seal problems. The tubing now being supplied
looks like white nylon.
Brian
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Simon Smith
Sent: 17 September 2006 21:30
Subject: RE: Europa-List: Brake tube
I have also had a pipe blow off. I have noticed three different types of
securing nut supplied by Europa. There is the Black plastic insert. A white
one and also a brass (coloured) metal one.
On a related subject, does any one know what the factory is now using to
replace the Jamar master cylinder unit on the finger brakes?
Simon
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Steven Pitt
Sent: 17 September 2006 20:52
Subject: Re: Europa-List: Brake tube
Svein
Ihad exactly the same problem when doing my first taxying test but both went
one after the other. Fortunately the grass was long enough to stop us.
Jeff is correct re the different sizes and I have used the brass/brass screw
ons from ACS with good success during the recent flight testing.
Steve Pitt G-SMDH
"http://www.matronics.com/Navigator?Europa-List"http://www.matronics.com/Nav
igator?Europa-List
"http://www.matronics.com/contribution"http://www.matronics.com/contribution
--
|