Alan,
Mine is aluminium coloured (not gold anodised); perhaps they come in
different shades. Richard is right, it is on the port side at the front
near to the oil filter. 1/2" dia flat disc about 3/32" thick with the 40
torx recess in the centre. I think your engine is too old for the ASB to
apply.
Regards,
William
----- Original Message -----
From: "Richard Iddon" <riddon@sent.com>
Sent: Thursday, October 19, 2006 7:56 PM
Subject: RE: Europa-List: FW: IMPORTANT! - Release of MANDATORY Rotax ALERT
SERVICE BULLETIN For 912 & 914 Engines
>
> Alan.
>
> The plug is not the one at the bottom of the tank. From memory, it is
> on the port side of the engine, right at the front and just below the
> gearbox. It has a fairly large head, coloured gold (cad plated?) and
> is, I think, the only Torx head bolt in that area. You don't need to
> drain the oil to check it but as Ian says, wire lock it after refitting.
>
>
> Richard Iddon G-RIXS
>
> Subject: RE: Europa-List: FW: IMPORTANT! - Release of MANDATORY Rotax
> ALERT SERVICE BULLETIN For 912 & 914 Engines
>
> <alan@kestrel-insurance.com>
>
> Ian
> Where is this plug. Is it the one we remove at the bottom of the oil
> tank to
> drain the oil ?
>
> Alan
>
>
> --
> 19/10/2006
>
>
|