I have already done something similar with vinilester formed over the belly
but did not include the tail support which was a mistake given how
difficult it is to turn over.
I also like your turn-over design to get at the belly.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of G-IANI
Sent: Sunday, November 05, 2006 05:14
Subject: RE: Europa-List: Before the top goes on
As Graham has said with the tunnel in the fuse is already fairly stiff.
I did the whole of the tri gear main wheels with the top off. The fuse
was on a wooden jig ( see
http://members.bellatlantic.net/~cpops/cradle.htm ) to support the tail
and the top was clecoed in place to check alignment when needed.
Everything came out just right.
Ian Rickard #505 G-IANI XS Trigear
Europa Club Mods Rep (Trigear)
e-mail mods@europaclub.org.uk
or direct g-iani@ntlworld.com
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of William
Daniell
Sent: 03 November 2006 17:10
Subject: RE: Europa-List: Before the top goes on
--> <wdaniell@etb.net.co>
I'm about to confront this task. And I have considered with trepidation
putting the (tri) gear in with the top on.
|