Troy
i know you wouldn't buy from the UK but the web site of a company
called speedflow is great for looking at what's available. they are
essentially racecar fittings but appear to be identical to the
aircraft AN series. We have used them for both alu lines and SS
braided. Web address is www.speedflow.co.uk Even the part
numbers seem the same as AN series No doubt you could find a similar
supplier in the US if ACS can't oblige
Regards
Paul
G-GIDY
On 15 Jan 2007, at 03:20, Troy Maynor wrote:
> Hi All,
> I am replacing the cloth braided old style fuel hose on my yet to be
> completed classic. I am going to run some Teflon 666 hose from the
> pump
> through the tunnel to a bulkhead fitting on the firewall and a
> return of the
> same quality to the reserve side of the tank. The ACS catalog is a
> little
> vague on fittings that go with the 666 stuff. I need to go from a
> 1/4" NPT
> 90deg. on the pump to the appropiate bulk head fitting, times two
> counting
> the return. Then, when it gets to the fitting on the reserve side
> of the
> tank adapter it is now a 1/8" NPT. I want the correct aircraft
> grade stuff,
> avoiding the use of jubilee/spiral hose clamps. I'm having trouble
> identifying the compatible bits. I have looked at the archive
> without the
> detail I need. Just tell me where to look I guess is the main
> question, but
> all clues accepted. I will need to source additional configurations of
> fittings like these in the future for the FWF side. Thanks to those
> who have
> gone before.
>
> Troy Maynor
> N120EU Europa Monowheel Classic
> Left to finish:
> Paint,(some) interior,engine install, (some) wiring.
> Weaverville, NC USA
>
> <winmail.dat>
|