Hi friends,
for the first runs with my monowheel I have bought an used ground adjustabl
e
Warp Drive prop - you never know.
The spinner, as a part of that deal was fitted only with the forward spinne
r
bulkhead.
The aft spinner bulkhead was not a part of the supply.
According to the engine manual for the Rotax 914 on page 8-5 the propeller
and spinner assembly is shown with two spinner bulkheads.
Do I need it?
"My" spinner was fixed with 9 screws to the forward bulkhead and was in use
approx. 150 hours without problems. The pre-owner changed to adjustable pro
p.
Thanks for some info to this.
Bruno Reith / UVT Reith
XS-mono, smart-Brabus,
|