rlborger a crit :
> How do you keep the individual female spade connectors in the plug?
> Especially the two yellow output lines from the Rotax alternator.
> There doesn't seem to be any mechanism to hold the connectors in
> place when the plug is connected to the voltage regulator.
Bob,
Looking closely inside the small spade housings, you'll see that there
is a recess for the locking tongue on each spade. No problem keeping the
female connectors in place.
On the contrary, you'll experience some difficulties fully inserting the
plastic plug on the regulator once the spades are in place.
Best regards,
Gilles
http://contrails.free.fr
|