Great, thanks!! I was starting to get worried if I was doing something
wrong, but I am glad to hear this from you.
--- "h&jeuropa" <europa@triton.net> wrote:
> <europa@triton.net>
>
> Andrew,
>
> We had the same problem when we started flying last year. We talked
> to Andy and filed a little off FL3 and even opened up the slot in OR5
> (with Andy's OK). Our outrigger still didn't seem to retract fully
> but we flew anyway.
>
> Now during our rebuild we fitted new OR5 to have the proper slot
> length and spent a lot of time fiddling with the outrigger assembly.
> We finally noticed that OR4 is hitting OR6 which prevents the
> outrigger from fully retracing. OR6 is not symmetrical. We found
> that flipping it over so short end (length from hole to end of block)
> faces aft gave us a little more movement of OR4 and results in the
> outrigger coming up properly. We suppose you could file some off OR4
> but the manual cautions against this (page 9-10 Issue 2). Fig 15 on
> page 9-9 shows the relationship of OR4 and OR6 with the outrigger
> retracted.
>
> Jim & Heather
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=114531#114531
>
>
>
>
>
>
>
>
>
>
>
|