Hi Dan,
Actually, not that difficult to figure out when you sort out the code. The code
is available on the Carr-Lane website. From the main page, go to their catalog
page. Select Alignment Pins from the left side menu. Select the Double-Acting
Ball Lock Pin. That page comes up in the "Features" option. Select the
"Dimensions" option. The Code is at the bottom of that page.
CL - (diameter in 16ths) - BPD(handle type, R,T,L) - grip length (decimal
inches)
- add S for stainless steel - add D for drive-out option - add 4BALL for 4
balls (2 standard) - add C for attached cable.
So: CL-4-BPDR-2.00 yields a 1/4 inch diameter, Ring handle, 2.00 inch grip
length,
steel, 2 balls, no cable.
Or: CL-5-BPDT-2.25-S-4BALL-C yields a 5/16 diameter, Tee handle, 2.25 Inch grip
length, stainless steel, 4 ball with cable.
I hope this helps.
Looking forward to meeting those at Oshkosh!
Good building and great flying,
Bob Borger
Visit - www.EuropaOwners.org
|