Nylon expands when it absorbs moisture. So you could try drying them
for a few days. However, I found that the nylon legs supplied with the
kit were slightly larger in diameter than the OR1 and Or3 sockets. I
had to shave off on a lathe to get it to fit properly. If you forced
them in, it may be impossible to remove. The only alternative would be
to cut off the legs and drill out the nylon. I would try the drying
option first.
--- Remi Guerner <air.guerner@wanadoo.fr> wrote:
> Hello all,
>
> I just received my monowheel speed kit. I tried to remove the
> outrigger OR3 fork to install the fairings. No way. Then I tried to
> remove the nylon leg from OR1. Impossible. May be the nylon has
> expanded with aging . Any suggestion ?
>
> Remi Guerner
>
> F-PGKL, XS S/N395 monowheel, 912S, Airmaster, 510 hours
>
|