Bob,
the other side of the gauge should be connected to the line going to the
air filter.
If the gauge reads when you suck on the pipe then I would thing that is
the one to connect to the Vac side.
On my gauge it is marked V and P. The v relates to vent or air filter
line and P relates to the vac side.
You are correct with the connections to the regulator (mine also has a
single pipe with a "T".
Geoff Leedham
G_EOFS
----- Original Message -----
From: R.C.Harrison
To: europa-list@matronics.com
Sent: Wednesday, August 08, 2007 8:01 PM
Subject: Europa-List: FW: More help required.....Vac gauge problem
|