Fred,
I discussed this with Andy two weeks ago and he shared the opinion than
other than Bob Harrison's clamping blocks that nothing else will work. The
pins will ultimately wear.
I have just applied Loctite 603 to my TP12's and TP9 (assembled, in
position) by forcing it in via a very short bristled artists bush.
If you have you fuselage open then my suggestion is to put a band of 603
about 3~5 mm wide on TP12 and TP9. You don't need much of this stuff, and
if you put on a modest amount you will be able to get it to let go by
applying heat.
Just my 2 cents worth.
Paul
|