Can i make a suggestion and say throw the rubber hose and go for two in
brake duct hose instead.
Its very light very flexible and designed for brake temps of what 300+
degrees. I ran it on off road race buggys
for years with no problems at all. You should be able to get it at most auto
shops.
craig
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Martin Tuck
Sent: Sunday, 10 February 2008 12:28 PM
Subject: Europa-List: 2 inch rubber hose
Hi Folks,
I noticed the 2 inch diameter hose connecting the carbs to the cold air
plenum are showing signs of crazing.
I found some standard plumbing hose the correct diameter and length but
I'm not sure whether the carbs get hot enough that I really need to use
some kind of heavier weight rubber tube.
Where can I find some suitable hose? Any ideas the spec of the Europa
supplied hose?
Yes, I could get it from the factory but am sure that the poor dollar
exchange rate and shipping costs will be a lot more than the actual
rubber hose.
Any suggestions?
Regards,
Martin Tuck
Europa N152MT
Wichita, KS
11:54 AM
11:54 AM
|