William-
Sorry, forgot to mention the static port. I plan to use the static port from
the
Europa ASI for both. I have both the Europa ASI and the Dynon. I will use
the Europa for the steam gauge and the Dynon probe for the Dynon.I mounted the
Getz base forward of the Europa ASI against the spar. I used an aluminum plate
provided by Getz and reinforced it with 2 layers of BID about 8 X 12 inches
about and 1/8 inch plywood the size of the plate.
Jim Puglise A-283.
-------------- Original message --------------
From: William Harrison <willie.harrison@tinyonline.co.uk>
>
>
> Hi
>
> Does anyone have experience of fitting a Dynon Angle of attack probe
> to a Europa, if so what was involved? In particular, the structural
> mounting and the arrangements for a static port?
>
> Does anyone know if the PFA/LAA have approved a mod for the Dynon probe?
>
> If not Dynon, what is the best bet for AOA measurement?
>
> Many thanks in advance.
>
> Willie Harrison - kit 401/G-BZNY
>
>
>
>
<html><body>
<DIV>William-</DIV>
<DIV> </DIV>
<DIV>Sorry, forgot to mention the static port. I plan to use the static
port
---From the Europa ASI for both. I have both the Europa ASI and the
Dynon.
I will use the Europa for the steam gauge and the Dynon probe for the
Dynon.I mounted the Getz base forward of the Europa ASI against the spar.
I used an aluminum plate provided by Getz and reinforced it with 2 layers
of BID about 8 X 12 inches about and 1/8 inch plywood the size of the
plate.</DIV>
<DIV> </DIV>
<DIV>Jim Puglise A-283. </DIV>
<DIV> </DIV>
gator
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
|