Ferg,
There is a temperature sensor and fitting that goes in the line between the
coolant filler manifold and the radiator. I purchased mine from Grand Rapids
Technologies ( http://www.grtavionics.com/ ). The temperature sensor is $18.
They don't list the fitting on their accessories page and but it is Part No.
H2O-Fit-01 and the cost was $30.00.
Contact Sandy (sandy@grtavionics.com) or 616-245-7700.
If you wish, you can see the sensor, fitting, installation instructions & final
installation at my build web site. Album Year #7 Q1 2008 middle of page 1.
Good building and great flying,
Bob Borger
http://www.europaowners.org/N914XL/
On Wednesday, February 27, 2008, at 02:41PM, "Fergus Kyle" <VE3LVO@rac.ca>
wrote:
>
>Good-day,
> In my writhing to complete the wiring for this project, I dimly
>recall the need to add a coolant temp sensor and indicator to the stack -
>and that someone had volunteered a source for same. I believe the sensor
>lay in one of the coolant lines but not sure where.
> I am begging for info on this topic (as I have for many before it)
>and would appreciate any reply.
>Cheers, Ferg
>PS: Am wiring in a Dynon EMS-D10 screen.
>
>
|