RE: Europa-List: Re: Door bulge because of seal

[craig bastin <craigb@onthenet.com.au>]

  Well here is my fix for the bulging doors, a piece of 3mm x 12mm
alluminium
  reduxed and flush rivetted, clears the door sill by about 3mm, door was
  slightly over flattened with a straight edge and clamps alloy bent to be
about
  3mm flatter than the curve through the door opening. doors are now even
and flush
  right along the opening with seals in place. Overall weight increase 80g
per door.

  craig
Checked by AVG.
6:14 PM